Printek FormsMaster 8003se Betreibershandbuch PDF herunterladen (Seite 23)

GETTING STARTED

PRINTER SELF-TEST

The printer performs many self diagnostics each time power is turned on. If

you wish to perform an actual printing test, use the following steps.

1. Make sure the printer is powered on with ribbon and paper loaded.

2. Take the printer off line (the ONLINE indicator will be flashing red).

3. Press the SETUP/MENU button four times to display

TEST MENU on

the front panel.

4. Press either of the ITEM buttons until

Test Mode is displayed on the

top line.

5. Press either of the VALUE buttons until

Barber Pole is displayed on

the bottom line.

6. Press the ONLINE button.

7. The printer will now exit Setup and begin printing a rotating

character pattern. To stop or restart printing the test pattern, press the

ONLINE button.

8. To take the printer out of the test mode, stop the test by pressing the

ONLINE button.

9. Press the SETUP/MENU button four times to display

TEST MENU.

10. Press either of the ITEM buttons until

Test Mode is displayed on the

top line.

11. Press either of the VALUE buttons until

Off is displayed on the

bottom line.

12. Press the ONLINE button.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 136 137

Keine Kommentare

Printek FormsMaster 8003se Betreibershandbuch Seite 23